Support & fix
Review joists, clips, channels and brackets with the selected profile and substrate. Matching the interface matters more than matching the appearance.
Consider every detail
Small components. A considered finish.
Plan accessories at the same time as the main profiles. The right schedule accounts for the fixing method, visible edges, transitions and the conditions behind the finished surface.
Close & finish
Account for exposed edges, outside corners, post tops and bases. Include the visible finishing pieces in the first material schedule.
Coordinate colour
View the photographed colour options and compare physical samples with your boards or panels before confirming the order.
The product collection
Find the right accessory
Choose a product system to view its components. Click an image for a closer look; select a colour where multiple samples are shown.
Decking accessories
Hidden clips, joists and edge finishes for your decking schedule.
Hidden deck clip
STD-C01
Confirm compatibility with the board groove, fixing method and selected joist.
Enquire about this productHidden deck clip
STD-C02
Confirm compatibility with the board groove, fixing method and selected joist.
Enquire about this productHidden deck clip
STD-C03
Confirm compatibility with the board groove, fixing method and selected joist.
Enquire about this productJoist
ST40K30A
Hollow joist profile. Confirm the supporting base and fixing layout for your deck.
Enquire about this productJoist
ST40S25
Joist profile for review alongside the selected boards and support arrangement.
Enquire about this productFascia board
ST140S10
A finishing board for the deck perimeter; coordinate fixing and movement details.
Shown in Teak
Enquire about this productFascia board
SG140S10
Coordinate the visible fascia with the deck surface and edge design.
Shown in Golden Teak
Enquire about this productL trim
ST53B53
An angle profile for edge finishing. Compare the photographed colour options.
Enquire about this productFencing accessories
Posts, channels and finishing components for a coordinated fencing layout.
Aluminium post
STF-P01
Review the post, base connection and fence layout as part of the complete assembly.
Enquire about this productPost insert strip
STF-P01-1
An insert strip for the post detail; confirm the matching post and installation position.
Enquire about this productComposite U channel
STF-U01
A channel profile to coordinate with the fence board and end connections.
Enquire about this productL-shaped bracket
STF-B01
A connection bracket. Confirm the joint, fixings and assembly requirements.
Enquire about this productPost cap
STF-C01
Finish the top of the post with a cap matched to the selected post profile.
Enquire about this productPlastic base cover
STF-C02
A finishing cover for the post base. Check the base and post combination.
Enquire about this productCladding accessories
L trims and dedicated SG219K26 finishing profiles for façade edges and transitions.
L trim
SG55B55
An angle trim for planning the visible edge detail of your cladding.
Enquire about this productL trim
SG60B40
An angle profile to coordinate with the selected cladding and corner arrangement.
Enquire about this productExternal corner · SG219K26
SG49K49A
An external-corner profile from the SG219K26 accessory group.
Enquire about this productTrim profile · SG219K26
SG49K49B
A dedicated SG219K26 trim profile. Confirm its position in the project detail.
Shown in Charcoal
Enquire about this productTrim profile · SG219K26
SG46K39
A dedicated SG219K26 finishing profile for review with the panel layout.
Enquire about this productProduct photographs show individual samples. Confirm current dimensions, colours and the components included in your quotation.
From selection to specification
Build the accessory list around your layout.
An area measurement is a useful starting point, but edges, corners and connection details determine the finishing components you need.
Discuss Your ProjectAccessory suitability depends on the selected main profile and installation detail. Confirm the matching components before placing an order; photographs are a selection reference.
- 01
Name the main profile
Provide the decking, fencing or cladding model code. Include the series and the preferred finish where known.
- 02
Mark the details
Highlight exposed edges, board ends, corners, openings, post positions and changes in direction on the layout.
- 03
Confirm compatibility
Review grooves, channels, trim interfaces, substrates and fixing methods. Similar-looking components are not necessarily interchangeable.
- 04
Agree the quantities
Confirm the approved layout, fixing schedule, cut lengths and any installation allowance before finalising the accessory order.
Designed around your project
Three systems. Three sets of details.
Decking: work from the base up
Resolve the supporting base and joists, then the clip interface, followed by the fascia and exposed-edge trims.
Fencing: follow each fence run
Identify posts and connections first. Add the relevant channels, insert strips, caps and base covers to the schedule.
Cladding: trace every transition
Map outside corners, perimeter edges and openings. Keep dedicated SG219K26 accessories identified with their matching panel detail.
Frequently Asked Questions
Practical answers for choosing accessories and preparing your project enquiry.
Selection & compatibility
3 questionsView answers
Will every clip fit every decking board?
No universal compatibility is implied. A hidden clip must match the board groove, fixing method and supporting joist. Send the decking model code and planned support arrangement for confirmation.
What is the difference between a fascia board and an L trim?
A fascia is a flat finishing board used in a perimeter detail. An L trim has an angled section that can finish an edge or corner. The appropriate component depends on the profile and the approved installation detail.
Which accessories are grouped with SG219K26?
The supplied product range groups SG49K49A, SG49K49B and SG46K39 with SG219K26. SG49K49A is identified as an external corner. Confirm the position and fixing detail for each selected trim with Sungem.
Colours & ordering
3 questionsView answers
Can I view different accessory colours?
Yes. ST53B53 has seven photographed options: Charcoal, Chocolate, Grey, Maple, Red Brown, Silver Grey and Teak. SG49K49A has Golden Teak and Walnut images. Select a labelled thumbnail to change the image. Confirm the current finish by physical sample.
How do I work out accessory quantities?
Provide the main profile code, layout, dimensions and edge or corner details. Quantities should be worked out from the agreed fixing and finishing schedule, including cuts and the installation allowance for your project.
Are fixings and accessories included with the main products?
Ask for an itemised quotation identifying each included component. Photographs showing multiple pieces are product references and do not define the contents or quantity of a supplied pack.
Your next step
Complete your product schedule.
Send the main product codes and a layout. We’ll help you review the accessory selection.